• New

UVA Topcoat Textured 500ml/32oz 485gr/2.1lbs Transparent

The H9 SI74 UVA Topcoat with Anti-Slip Nano Technology forms a dense, ultra-hard, and hydrophobic protective layer specifically engineered for smooth and slippery surfaces. Its sprayable nano-particle system creates a fine-textured, almost invisible anti-slip finish that enhances traction without affecting the surface’s original gloss, clarity, or appearance.

In addition to restoring and protecting marble and granite tiles, it reinforces and preserves wooden floors, boat decks, surfboards, and other high-gloss or coated surfaces, ensuring long-term durability and protection. It also serves as a high-performance barrier for polyester, epoxy, polyurethane, and acrylic resins—significantly improving their resistance to wear, abrasion, chemicals, and UV degradation.

This advanced formulation provides a slip-resistant, chemically resilient, and UV-stable finish, making it ideal for both indoor and outdoor environments where safety, durability, and aesthetics are equally essential.

Market Segments

H9 SI74 UVA is a versatile solution suitable for a wide range of industries, including:

  • Industrial & Commercial Kitchens – Food-safe, anti-slip protection for counters, floors, and wet work areas.

  • Stone & Surface Restoration – Restores and protects marble, granite, and natural stone with a nearly invisible anti-slip finish.

  • Stone & Tile Flooring – Durable, hydrophobic, anti-slip coating for bathrooms, pools, and high-traffic areas.

  • Furniture & Interior Design – Anti-slip protection for wood, PVC, and varnished surfaces without changing appearance.

  • Marine & Water Sports – Long-lasting, anti-slip coating for boat decks, surfboards, and other glossy marine surfaces.

  • Infrastructure & Construction – Slip-resistant protection for walkways, bridges, ramps, and outdoor floors.

  • Manufacturing & Industrial Areas – Tough, chemical-resistant anti-slip coating for factory floors and machinery zones.

  • Public & Commercial Buildings – Ideal for lobbies, stairs, and corridors where safety and aesthetics matter.

Reachable Area

12.5ml/m² (0.04oz/ft²) for one layer (wipe or spray) with a thickness of around 6 microns. 1L covers up to 80m² (32oz - 800ft²).

Coverage may vary depending on coating thickness. Can be sprayed wet on wet to create thicker layers.

Technical Specifications

  • Hydrophobic & Easy to Clean & Anti-slip

  • Hardness: H9 (Ultra-Durable)

  • Durability: Near-Permanent Protection

  • Temperature Resistance: Up to 300°C / 550°F

Key Advantage

  • Includes UVA High-performance UV absorbers with thermal stability

  • Uniform Matte Finish – Hides minor imperfections in the underlying surface

  • Enhanced Surface Hardness – Reinforces materials for exceptional durability.

  • Restores & Protects Marble & Granite – Revitalizes and preserves natural stone surfaces.

  • Smooth & Resilient Finish – Creates a dense, non-porous layer for superior protection.

  • Effortless Maintenance – Non-stick, easy-to-clean surface reduces cleaning effort.

  • Water & Dirt Repellent – Prevents buildup and contamination, keeping surfaces pristine.

  • Superior Scratch Resistance – Shields underlying layers for maximum protection.

  • Cost Efficiency – Extends cleaning intervals, reducing maintenance costs over time.

Recommendations

A fully cured H9 SI74 UVA layer can only be removed by sanding the surface with ceramic sandpaper (recommended grit: P800–P1200, depending on the surface condition).

Easy to Apply

Application; 1. Clean the surface 2. Sterilize the surface (acetone)  3. Apply via the cotton pad one even layer or use a (HLVP) Spray-gun for multiple layers wet on wet. 4. Let it cure.

Curing:

Ambient Curing:

The ideal temperature range is typically between 20°C / 70°F and 35°C / 95°F.

Humidity:

The relative humidity should be preferably below 70%. 

Curing Time:

Complete curing time is approximately 5 days; after this period, the curing can be checked.

Heat Curing:

Cure at 120°C / 250°F  for 1.5 hours.

Verify that the coating is completely cured after heating in the oven.

To check curing, press your finger firmly on the coated surface. No material should stick to your finger.

Curing by Hot Air Blow:

Set the hot air gun temperature to 120°C / 250°F  to 130°C / 265°F and apply for 3 to 4 minutes.

Approximately 80% to 90% curing can occur within 3 to 4 minutes. After this, the surface will be dry. Full curing requires 24 hours.

Stacking should be avoided until full curing is achieved.

Storage and handling

Store in dark and dry conditions at room temperature.

Use gloves and mask.

Ask for our MSDS via 24h - Emergency Phone: +62 811 640 5000 (advisory service in German, English, or Bahasa language)

Content of packaging

H9 SI74 UVA Coating Textured Transparent Semi Glossy 1L/32oz

Packaging Information

Includes plastic sealed wrap

1 pcs Weight 685 gram (1.51 lbs) bottle size L11.5cm x W6cm x H9cm  (4.53" × 2.36" × 7.20")

48 pcs in carton L52cm x W44cm x H21cm (20.5" × 17.3" × 8.3")  32,9 kg / 72,5 lbs

SI7405UVA