• New

UVA Topcoat 500ml/16oz 460gr/1lbs Transparent

The H6 SI34 UVA Topcoat forms an ultra-hard, glass-like, and hydrophobic protective layer that provides superior resistance against even the most aggressive chemicals—including hydrofluoric acid (HF), hydrochloric acid, citric acid, and red wine—while remaining completely food-safe.

With medium hardness and medium flexibility, it is especially suitable for surfaces that require a small degree of stretch, maintaining excellent adhesion and durability even on slightly flexible substrates.


Market Segments

H6 SI34 UVA is a versatile solution suitable for a wide range of industries, including:

  • Building Protection – Enhances architectural paints, especially suited for walls and ceilings.

  • Caravans & Recreational Vehicles – Provides long-lasting surface protection against UV, dirt, and weathering.

  • Furniture & Interior Design – decorative panels.

  • Industrial Coatings – Enhances the performance and chemical resistance of epoxy, polyester, and polyurethane systems.

Reachable Area

12.5ml/m² (0.04oz/ft²) for one layer (roll, wipe or spray) with a thickness of around 6 microns. 1L covers up to 80m² (32oz - 800ft²).

Coverage may vary depending on coating thickness. Can be sprayed wet on wet to create thicker layers.

Technical Specifications

  • Hydrophobic & Easy to Clean

  • Hardness: H6 (Ultra-Durable)

  • Medium Flexibility

  • Durability: Near-Permanent Protection

  • Temperature Resistance: Up to 300°C / 550°F

Key Advantages

  • Includes UVA High-performance UV absorbers with thermal stability

  • Enhanced Surface Hardness – Reinforces materials for exceptional durability.

  • Smooth & Resilient Finish – Creates a dense, non-porous layer for superior protection.

  • Effortless Maintenance – Non-stick, easy-to-clean surface reduces cleaning effort.

  • Water & Dirt Repellent – Prevents buildup and contamination, keeping surfaces pristine.

  • Cost Efficiency – Extends cleaning intervals, reducing maintenance costs over time.

Recommendations

A fully cured H6 SI34 UVA layer can only be removed by sanding the surface with ceramic sandpaper (recommended grit: P800–P1200, depending on the surface condition).

Easy to Apply

Application; 1. Clean the surface 2. Sterilize the surface (acetone)  3. Apply via the cotton pad one even layer or use a (HLVP) Spray-gun for multiple layers wet on wet. 4. Let it cure.

Curing:

Ambient Curing:

The ideal temperature range is typically between 20°C / 70°F and 35°C / 95°F.

Humidity:

The relative humidity should be preferably below 70%. 

Curing Time:

Complete curing time is approximately 5 days; after this period, the curing can be checked.

Heat Curing:

Cure at 120°C / 250°F  for 1.5 hours.

Verify that the coating is completely cured after heating in the oven.

To check curing, press your finger firmly on the coated surface. No material should stick to your finger.

Curing by Hot Air Blow:

Set the hot air gun temperature to 120°C / 250°F  to 130°C / 265°F and apply for 3 to 4 minutes.

Approximately 80% to 90% curing can occur within 3 to 4 minutes. After this, the surface will be dry. Full curing requires 24 hours.

Stacking should be avoided until full curing is achieved.

Storage and handling

Store in dark and dry conditions at room temperature.

Use gloves and mask.

Ask for our MSDS via 24h - Emergency Phone: +62 811 640 5000 (advisory service in German, English, or Bahasa language)

Content of packaging

H6 SI34 UVA Coating Transparent 500ml/16oz

Packaging Information

Includes plastic sealed wrap

1 pcs Weight 660 gram (1.2 lbs) bottle size L11.5cm x W6cm x H9cm  (4.53" × 2.36" × 3.6")

40 pcs in carton L52cm x W44cm x H21cm (20.5" × 17.3" × 8.3")  31.7kg

SI3405UVA