Polyester Putty 1kg/2.2lbs (2K) L.Grey

Level irregularities like holes in surfaces of steel, aluminium, wood, concrete and polyester on your car with MOTIP 2-component Polyester Putty. Polyester Putty is elastic and very easy to sand. Polyester putty is re-sprayable with all lacquer systems and resistant to chemicals and the weather. MOTIP Polyester Putty can be applied in layers with a thickness up to 2 cm.

Characteristics

  • Very easy to sand

  • Elastic

  • Re-sprayable with all lacquer systems

  • Resistant to chemicals and weather influences

  • Excellent adhesion

Usage instructions

  • Before use, carefully read the directions on the packaging and act accordingly.

  • Processing temperature 15 – 25°C.

  • The surface should be clean, dry and free of grease.

  • Remove loose old lacquer and rust and sand the surface.

  • Mix the required amount of putty with the harder.

  • Apply in the desired layer thickness.

  • After hardening, sand and when desired apply a fine putty.

The drying time depends on the ambient temperature.

After use, directly clean the tools used.

Do not store the surplus material, mixed with harder, in the can.

SIX51000