H9 SI24 Marble No Etching Matte 50ml/1.7oz

SI24 H9 coating is a thick, hard, hydrophobic layer that can withstand all kinds of chemicals, including HF (Hydrofluoric Acid), Hydrochloric Acid, Citric Acid, and Red Wine, and is food-safe.

In addition to marble, it also protects granite, wood-varnished, and PVC-laminated countertops and tabletops.

It can also be used to renew weathered marble.

Reachable Area

10ml/m²   - 0.034oz/ft² 

50ml/5m² - 1.7oz/50ft²

Technical Specifications

  • Thickness: 6 micron 

  • Hydrophobic

  • Hardness H9

  • Durability : Near Permanent

  • Temperature resistance: 850C

Advantages

  • Increased surface hardness

  • Renews marble and granite

  • Makes the surface hard and smooth, permanently protected 

  • Creates an easy-to-clean surface

  • Repels water and dirt.

  • Scratch resistant, optimal protection from the clear layer underneath

  • UV Protection 

  • Cost reduction, cleaning intervals will be extended

Recommendations

  • A fully cured SI24 layer can only be removed by machine polishing from the surface, using wool pad and heavy compound.

  • Prior to the application of a SI24 Ceramic layer it is crucial that the surface is in a new or like-new condition.

  • We recommend to clean the surface prior to the application with our sterile cleaner

Easy to Apply

Application; 1. Clean the surface 2. Sterilize the surface  3. Apply via the cotton pad an even layer  4. Let it cure.


INSTRUCTION WORKING STEPS

APPLICATION VIDEO SI24

Curing:

Ambient Curing:

  • The ideal temperature range is typically between 20°C / 70°F and 35°C / 95°F.

Humidity:

  • The relative humidity should be below 70%.

Curing Time:

  • Complete curing time is approximately 5 days; after this period, the curing can be checked.

Heat Curing:

  • Cure at 120°C / 250°F  for 1.5 hours.

  • Verify that the coating is completely cured after heating in the oven.

  • To check curing, press your finger firmly on the coated surface. No material should stick to your finger.

Curing by Hot Air Blow:

  • Set the hot air gun temperature to 120°C / 250°F  to 130°C / 265°F and apply for 3 to 4 minutes.

  • Approximately 80% to 90% curing can occur within 3 to 4 minutes. After this, the surface will be dry. Full curing requires 24 hours.

  • Stacking should be avoided until full curing is achieved.

.

Storage and handling

Store in dark and dry conditions at room temperature.

Use gloves and mask.

Ask for our MSDS via 24h - Emergency Phone: +62 811 640 5000 (advisory service in German, English, or Bahasa language)

Content of packaging

  • 1 Pcs 50ml/1.7oz SI24 Coating  (Suitable for Marble, Granite, Varnished-wood, PVC-laminated)

  • 1 Micro towel 40x40cm 15"x15"

  • 6 Cotton pad

  • 1 Dripper plug

  • 1 Pair Nitrile Gloves

Packaging Information

Includes plastic sealed wrap

1 pcs Weight 180 gram/ 0.4 lbs single carton size L9.5cm x W6cm x H11cm / L3.7inch x W2.4inch x H4.3inch

82 pcs in carton W52cm x H25cm x D44cm / W22inch x H15inch x D18inch Weight 14,8 kg 32,6 lbs

SI24BKIT